If you are in the construction industry, or if you are in charge of excavating dirt for a mining operation, you might wonder if there is actually a difference between the loaders that will be used at each of these jobsites. When you initially look at these machines, they will all seem very similar. They are different, but you will not notice these differences until you look at the specs for each one. Obviously, if you are using one of these machines, the differences will be quite noticeable. This overview of the difference between a construction loader, and a mining wheel loader, will help you understand which one will be best for your particular job site.
What Is A Loader Used For?
This is a piece of heavy machinery, equipment that can be used to move large amounts of debris. For example, if you are working on a demolition project, all of the boards, cement, or asphalt that is now in a pile of rubble can easily be removed by these loaders. If you are in an area that receives a substantial amount of snow, loaders are used to remove the snow from streets and highways. If you are in a business that deals with grain, gravel, recycled materials, or even woodchips, these are fantastic mobile units that can help you accelerate the process of completing your job.
What Is A Construction Loader?
A construction loader is a loader that is used specifically in the construction industry. These are designed to handle materials that will be indicative of this particular type of job site. You will likely be pushing dirt out of the way as you are flattening the area, preparing for the people to lay concrete. It can also be used if you are hiring people to fall trees, allowing these machines to either lift the trees and move them, or simply drag them to a location where they can be loaded and taken away. Therefore, they must be a large loader, one that has a very high capacity for lifting. These are typically around 200 hp motors, possessing a operating weight of about 75,000 pounds.
What Is A Mining Wheel Loader?
These loaders are little bit different than the ones you will find on a construction site. Primarily, they are extremely large. They are going to have motors that can operate in excess of 350 hp, and will have an operating weight of of 500,000 pounds or more. This is because they are moving much more than dirt or gravel. They are actually capable of extracting material out of the side of the pit where the mining operation is. They are able to move incredibly large boulders, and all of the heavy material that may be in the quarry that needs to be extracted.
Where Can You Get These For Reasonable Prices?
The prices that you pay will vary considerably depending upon the country of origin. If you decide to purchase this in the United States, they can be extremely expensive. However, if you want to save a substantial amount on your purchase, always look at what is available in China. Not only do they produce equipment that is reasonably priced, the quality of this equipment will ensure that it will function as advertised, and last for well over a decade or more.
Now that you know the difference between a construction loader and a mining wheel loader, you can see that the differences are actually quite minimal. You are simply looking at differences in size, and lifting capacity, when you are comparing the two. It makes sense depending upon the type of materials you are using to get one that is going to accommodate that amount of weight. It also is important to make your purchase from a company in a country that can save you the most money.